Baglihar Dam
Bahlihar Hydropower Project is located on the Chenab River in the northern Indian state of Jammu & Kashmir. It consists of a gravity concrete dam 144.5 m high and 363 m long, which has a total volume of 1.9 million m³, creating a reservoir with a capacity of 475 million m³. The underground powerhouse is 221 m long, 24 m wide and 51 m high. Six Francis turbines, each with a capacity of 150 MW, produce a total capacity of 900 MW, utilizing a gross head of 130 m.
Encardio-rite was awarded the complete contract for supply as well as installation of safety monitoring instrumentation for the project including:
- Vibrating wire piezometer
- Vibrating wire pressure cells
- Seepage measuring device
- Water level indicator
- Four-point mechanical borehole extensometer
- Three-point mechanical borehole extensometer
- Three-point electronic borehole extensometer
- Vibrating wire joint meter
- Uplift pressure meter
- Normal & inverted pendulum
- Tilt meter
- Thermistor probe
- Tape extensometer with groutable anchors and calibration frame, etc.
- Rock bolt load cell -vibrating wire type
- Readout units
- Data acquisition system